Technical Data Summary :

​

Dimensions /Width         

                                       Main Body                    Tank
Height                             1310mm/51.6”              1100mm/43.3”
Width                              730mm/28.7”                400mm/15.7”
Depth                              620mm/24.4”                400mm/15.7”
Net Weight                      170kg/374.8Ibs             38kg/83.8lbs
Gross Weight                  207kg/456.4Ibs             42kg/92.6lbs
 

Packing Size                   

                                       Main body                     Tank 
Height                             1450mm/57.1”              1180mm/46.5”
Width                              730mm/28.7”                440mm/17.3”
Depth                              670mm/26.4”                440mm/17.3”   
 

Power Requirement                                             100Vac/240Vac 50/60HZ,
Power Consumption                                            70VA
Operating Temperature Range                            -20ºC/-4ºF to 70ºC/158ºC
Max Inlet Compressed Air Supply                       217PSI/15bar/1500kPa
Compressed Air Input Flow                                 1100L/(min) (39.0cfm)
Nitrogen Purity                                                     95-99+%
Nitrogen Output                                                   228L/min (8cfm)@116PSI/8bar/800kPa Absorption pressure
Maximum Nitrogen Pressure in Tank                   44PSI/3.0bar/300kPa less than the Inlet Compressed Air Supply 
Maximum Operating Pressure                            12PSI/0.8bar/80kPa less than the Nitrogen pressure in Tank
Minimum Operating Pressure                             5PSI/0.3bar/35kPa
Over Pressure Setting Range                             0-29PSI/0-2.0bar/0-200kPa
Nitrogen Purges                                                  0-9
Inflator Accuracy                                                 ±1PSI/0.07bar/7kPa
Resolution                                                           1PSI/0.1bar/5kPa
Units of Measurement                                         PSI/bar/kPa   

​

​

​

​

Specifications

​

1. Generates nitrogen from your compressed air
2. 2 Pre-Filters
3. 118L/31.1gal (us) external nitrogen storage tank
4. Auto-start inflation 
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11. 4 Nos. *8M/26ft standard hoses with single clip-on closed chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen Purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. 6 air outlets allow simultaneous inflation of up to 6 tyres
19. Auto Shut-Off
20. 1 Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun
21. Options available :

 

​

​

 

​

​

​

Operation Steps

​

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose(s) to tyre valve stem.
3. FOR TOP-OFF ONLY : Push the “FILL/PURGE” button once.
    FOR NITROGEN CONVERSION : Push and hold the “FILL/PURGE” button for 2 seconds unit the LCD screen       

    shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure tyre inflation is complete.

​